BMW Diagnose Software Anleitung Download – Diagnostic Software
Menu
Cart 0

Anleitungen

HERUNTERLADEN UND EINSTELLUNGEN ANLEITUNG
BMW Diagnostic Software Inpa Download
Bitte benutzen Sie Keinen Browser zum Herunterladen !
  • Ich bin nicht für mögliche Fehler, wie z.B.: nicht genügend Speicherplatz oder die Internet Geschwindigkeit verantwortlich !
  • Bitte schreiben Sie auch nicht, dass das Herunterladen gestoppt wurde durch zu große Dateien oder ähnliches. Dies geschieht durch das Benutzen des Browsers.
  • Emails mit solchen Problemen wie dem Browser, werden nicht mehr beantwortet.
  • Da der Server große Dateien enthält, benutzen Sie z.B. bitte Jdownloader.
  • Sie können alle anderen kostenlose Download-Tools verwenden, Jdownloader ist nur mein Vorschlag! Ich bin kein Lieferant des Programms !
  • Um Fehler zu vermeiden! Erlauben Sie bitte keine "Jdownloader"Entpacken-Dateien! (Deaktivieren Sie dies in den Einstellungen vor dem Start des Herunterladens). Entpacken Sie diese nach dem Herunterladen selbst.
  • Die Verwendung eines Antivirenprogrammes und eines Diagnoseprogrammes ist zeitgleich nicht möglich.
  • Kostenlose Version von Mega hat jetzt eine 5 GB Grenze. Sie können eine VPN verwenden, um Ihre IP ändern.Wenn Sie ein Limit zum herunterladen Ihrer Dateien haben Die Änderung der IP- Adresse kann solche Probleme beheben, entfernen Sie alle Cookies und Verlauf und versuchen Sie es erneut.
  • Oder Verwenden Sie alternative (Amazon Link Nur auf Anfrage! ) Amazon ist begrenzt beim downloaden auf 5 GB, bitte die dateien einzeln herunterladen.
  • Support for Amazon large files over 5GB !
  • Wenn Sie kein Grundwissen besitzen wie man Dateien herunterunter lädt, extrahiert oder Sie Probleme beim Lesen einfacher Beschreibung der Anleitung haben , entscheiden Sie sich bitte nicht für den Kauf dieses Programmes. Bitte fragen Sie mich nicht um Hilfe.
  • Ich bin nicht für die Fehlfunktionen des Download - Managers verantwortlich!
BMW Diagnostic Software Inpa Download Wenn der "Jdownloader" nutzlos für Sie ist, nutzen Sie andere Download Manager:

Passwort zum unzip Archives :
      • Für DIS V44_V57 : Dealirio (unzip just once ! run exe)
      • Für INPA DIN76  : din76
      • Für INPA_Fxx_v2_TD-530 : cartechnology#inpafxxv2!
      • Für NCS Expert German:  #MikeBIMMER@NCSExpert543
      • Launcher Password : Scorpilaunch
      • ETK Password : BETK_05-2016_Smallville
      • Navcoder :  kkkkk
ONLINE HILFE
  • Bitte beachten Sie die Online-Hilfe ist für richtigen Installationsprogramme ! Nicht für Hilfe wie man muss Dateien aus dem server herunterladen !
  • In extremen Fällen kann ich bei der Installation Online-Hilfe anbieten.
  • Wenn Sie Probleme mit der Installation haben, aber nur das Programm INPA Ediabas NCSexpert installieren wollen, helfe ich auch.
  • Andere Programme sind sehr zeitaufwendig und arbeiten durch eine virtuelle Maschine. Durch Teamviewer ist dieses nochmals sehr unangenehm.
  • Wenn Sie wirklich keine Ahnung haben, wie man das Programm installiert, senden Sie 12 £ auf mein PayPal - Account willdavis152@gmail.com Oder benutzen Sie den direkten Link ONLINE HILFE.
  • Senden Sie  das Geld für "Freunde oder Familie" andere Formen werden nicht akzeptiert.
  • Laden Sie  TEAMIEWER runter und schreiben Sie mir Ihr:ID und Passwort (Teamviewer) Ihr Betriebssystem 32 oder 64bit und wir werden einen passenden Zeitpunkt für die Installation finden.
  • Die beste Zeit ist in der Regel am Nachmittag . Von Montag bis Freitag 12- 21 UHR ! An den Wochenenden arbeite ich nicht. 
INPA EDIABAS PACKAGE
  • Wenn Sie WIN 7-8 haben, muss das Programm im kompatiblen Modus mit WinXP installiert werden. 
  • WIN COMPATIBLE MODE XP
  • Bitte verwenden Sie BMW Standard-Tools 2.12 als Basis und installieren Sie diese, wenn Sie über Win 7-8-10 64bit verfügen! (Anleitung auf dem Server)
  • Installieren Sie alle Programme auf ihrem Laufwerk C:/, nicht auf dem Desktop!
  • Alle Ordner müssen auf dem Laufwerk C:/ bewegt werden. Um Fehler zu vermeiden "A-LZH Archive not found" 

Installations Probleme mit Inpa ? Versuchen Sie:

INPA  ALL IN ONE  




INPA GER/ENG  EASY

 


INPA F-SERIES
  • Extract "BMW Standard Tool" with winrar.
  • Run program. (64bit system users right mouse click Troubleshoot  comparability.
  • Extract folder "INPA F_xx_v2" ,copy files from Inpa  folder and paste(replace old files) to the folder EC -APPS .
  • The same do it with folder "Ediabas" copy from folder "INPA F_xx_v2"  and paste to drive C:/ (replace files with old Ediabas folder).
  • Vor der Installation AntiVirus und Firewall muss abschalten werden!
NCS expert
  • Copy folder  and paste to drive C:/  (replace old ncs expert files ).
  • Go to folder "Ediabas" and run "Ediabas Konfigurator" choose your interface.


BMW INPA EA-90X Installation :

Part 1: Environmental Path Changes

Windows Vista WIN 7 WIN8 

1.1 StartMenu>ControlPanel>ClassicView>System>AdvancedSystemSettings 
1.2 System Properties>Environment Variables
1.3 UserVariables>Select Temp
1.4 SystemVariables>Select Path>Edit
1.5 Change the end of the variable value,from Wbem to Wbem;c:ediabas in 
1.6 OK>OK>OK

Windows 2000 and XP 
1.7 My Computer>Properties
1.8 System Properties>EnvironmentVariables
1.9 User Variables>Select Temp
1.10 System Variables > Select Path > Edit
1.11 Change the end of the variable value, from Wbem to Wbem;c:ediabas.bin 
1.12 OK > OK > OK

Part 2: First Install
2.1 Move the folderI INPA_EA-90X to C:/
2.2 C:>INPA_EA-90X>INPA_Setup>Programminstallation
2.3 Run the application setup.exe (Windows Vista WIN 7  WIN8 users must run it in XP Compatibility Mode!)

2.4 Follow the simple on-screen instructions.
2.5 Select the programs you either want to install or update.
2.6 Selec tthe interface you want to use:STD:OBD
2.7 Select the COM-Port you want to use and possibly a USB-RS232 adaptor.
2.8 Installation will begin.

Part 3: Second Install
3.1 C:>INPA_EA-90X>Referenz>Install
3.2 Run the application Instprog Windows Vista WIN WIN8 users must run it in XP Compatibility Mode!) 
3.3 English>Continue>Continue
3.4 Select C:>Continue
3.5 Select BMWGroup Rectification Programs UK>Continue
3.6 Select the programs you either want to install or update>Continue
3.7 Select OBD>Continue>Continue
3.8 Installation will begin.
3.9 End

Part 4: Third Install
4.1 C:>INPA_EA-90X>INPA_Update 
4.2 Update>Yes

Part 5: Fourth Install
5.1 Go to C:EC-APPS and replace the existing INPA folder,with the INPA folder in Folder_1 


12 Schritte in Kürze:
  • Wählen Sie Folder "INPA Setup"
  • Wählen Sie Ordner "Programminstallation"
  • Wählen Sie "Setup.exe"
  • Zurück zum "INPA Setup"
  • Wählen Sie Ordner "referenz"
  • Wählen Ordner "Install"
  • Wählen Sie "Instprog.exe"
  • Gehen Sie zum "Folder "Inpa Update"
  • Wählen Sie "Update.exe"
  • Gehen Sie  zum Ordner "Ordner 1"
  • Copy Folder "Inpa"
  • Eretzen Sie Ordner INPA in C: EC-APPS

Many people have aftermarket interface which is not suitable for the car.. Any version Inpa works excellent with all Windows version 32 or 64 bit. 
If you have done installation according with instruction and Inpa not works properly, that means your interface is wrong, not program Inpa or NCS Expert ! 
Make sure  pin 7 pin 8 is bridged in your interface and have latest  FT232RL chipset



  • DIS V44 UND V57 16''
  • Wenn sie IBM haben ... und es tritt ein Fehler 250 auf, ist hier die Lösung : Deinstallieren Sie alles und reduzieren Sie das RAM 256 physisch in eine native Installation.Danach funktioniert es wie von Zauberhand.
Installing BMW ETK:
  • The computer name must be in Latin.
  • Ports should be set in 1027 and 1028 during the installation, in the lower fields will already in 2024 and 2025.
  • Addresses of servers blank.
  • Catalog RR is set if a password oxford12.
  • Product ZINORO set if a password shenyang15.
  • Market choose Eastern Europe.
  • The company and business partner ID 1 and 1 (in both fields).
  • Install a DVD or a virtual disk with the downloaded or copy to root directory


Freundlich und Hilfsbereit Links :

ISTA/D Rheingold Standalone 
  • Remove previous installation completely.
  • Install .Net Framework 4.5.2 or higher,
  • Ediabas 7.3, Java, vcredist_x86 x64 and vs90_piaredist ( Tools &Other DB  -prerequisites file ). Install Microsoft Visual C++ ,2005,2008,2010,,2012,2013,
  • VC runtime 2015 (X86 und X64) For 64bit System
  • Redistributable. X86 & X64  For 64bit System
  • All in One Runtimes
  • Run RCleaner V4.4.
  • Unblock Rheingold 4  base archive & extract.Use 7-Zip to unzip  archive.For unpack archives use 7-zip 16.04 or higher. To “unblock” a file, right-click it in Windows Explorer, choose Properties from the context menu, click the Unblock button in the lower right-hand corner of the resulting dialog, and hit OK or Apply:
  • In the Download folder extract the Rheingold Standalone 4 (base files).7z with 7-zip and move the resulting folder called Rheingold to the C:/ . Make sure everything is unlocked !
  • Find in an subfolder files Data_Global & DE & EN and extract with 7-ZIP. (UNBLOCK!)BMW Diagnostic Software Inpa Download
  • Locate the extracted database files  and copy these to the empty folder :  Rheingold\SQLiteDBs folder.BMW Diagnostic Software Inpa Download
  • Go to folder   Rheingold/TesterGUI/BIN/RELEASE/ISTAGUI.exe . ISTAGUI.exe  (Rheingold ) put a shortcut on the desktop and run.
  • Enter license key from rheingold-license.txt (copy and paste) note: enter "1" (without the quotes) for ISIS > Finish > ok (ignore the warning message). And start again program.Paste licence in window where is LICENCE.  
  • Run standalone reg fix file provided.  Make sure you use the right one for x86 or x64 systems. 
TROUBLESHOOTING
Make sure to:
    • Turn off Windows Firewall Service.
    • Run ISTAGUI.EXE  (ISTA)) as Administrator.
    • Make sure no files are "blocked" in Rheingold directory.
    • Those three things will eliminate many errors like :
"Failed to start ISTA Please make sure your ISTA configuration is valid. In doubt reset any non standard ISTA configuration and reinstall."
                  This means that files was not unlocked properly run reg fix ,Rcleaner
 
It should look like this  :  Data, Global Data, Language Data have correctly value  

BMW Diagnostic Software Inpa Download
To resolve connecting problems with ECU modules in old cars you can increase response time on receive and connecting commands in Ediabas.ini.
Old INPA trick. (This trick affects on all cables ICOM, K-Line adapter, K-Dcan etc. May be it will help someone)

Values in Ediabas.ini

Change on

TimeoutConnect = 20000
TimeoutReceive = 20000
TimeoutFunction = 59000
    • "The dealer data update failed. The processing of warranty issues is only possible if the dealer data is correct. Please check your network connection to your ISIS or retry the update later." - Update date/hour in your system.
Make sure your interface  pin 7 and 8  is bridged
 
Database error can result from a number of possible reasons:
  • You do not have the prerequisite software installed (vcredist 2008-2015), EDIABAS, Java, or .NET Framework 2, 3, & 4.62)
  • You failed to unblock archive before extracting
  • You are not running as administrator if installed in a restricted location on your primary OS hard drive.
  • You are missing the required SQLiteDB's [5 necessary = DiagDocDb, 2 _OTHER, 2 language (eg 2x _ENGB for British English)].
ISTA 4.02.30 Standalone With programming only through ICOM for F- G SERIES !
  • Extract the 4.02.30 standalone
  • Copy the SQLiteDBs folder and the data_swi folder over from the previous version 4.02.22. Overwrite if it asks.
  • Copy all inspi's files to your Temp\ISTA_STORE\Downloads folder
  • Run the standalone reg fix only first. The database can be done after.
  • Launch istalauncherconsole
  • Run and check if launcher console will install your files
FILES
  1. BMW_ISPI_ISTA-DATA_DELTA_4.xx.istapackage
  2. BMW_ISPI_ISTA-DATA_DELTA_en-GB_4.xx.istapackage
  3. BMW_ISPI_ISTA-META_SDP_4.xxx.xml
  4. BMW_ISPI_ISTA-META_4.xxx.xml
  5. BMW_ISPI_ISTA-META_SDP_4.xxx.xml
  6. BMW_ISPI_ISTA-SDP-DELTA_4.xxx.istapackage
Update 4.02.14 to 4.02.30 
  • Extract the 4.02.30 standalone
  • Copy the SQLiteDBs folder and the data_swi folder over from 4.02 version into 4.03 Overwrite if it asks.
  • Copy all inspi's files to your Temp\ISTA_STORE\Downloads folder
  • Run the standalone reg fix only first from 4.02.30. The database can be done after.
  • Launch istalauncherconsole
  • Run and check if launcher console will install your files
FILES
  1. BMW_ISPI_ISTA-DATA_DELTA_4.xxx.istapackage
  2. BMW_ISPI_ISTA-DATA_DELTA_en-GB_4.xxx.istapackage
  3. BMW_ISPI_ISTA-META_4.xxx.xml
  4. BMW_ISPI_ISTA-META_SDP_4.xxx.xml
  5. BMW_ISPI_ISTA-META_SDP_4.xxx.xml
  6. BMW_ISPI_ISTA-SDP-DELTA_4.xxx.istapackage
  7. BMW_ISPI_ISTA-DATA_DELTA_4.xxx.istapackage
  8. BMW_ISPI_ISTA-DATA_DELTA_en-GB_4.xxx.istapackage
  9. BMW_ISPI_ISTA-META_4.xxx.xml
  10. BMW_ISPI_ISTA-META_SDP_4.xxx.xml
  11. BMW_ISPI_ISTA-SDP-DELTA_4.xxx.istapackage
IN SHORT 
Folder SQLiteDBs:
DiagDocDb.sqlite
streamdataprimitive _OTHER.sqlite
xmlvalueprimitive_OTHER.sqlite
streamdataprimitive_ENGB.sqlite
xmlvalueprimitive_ENGB.sqlite
Installation:
For computer x86:
  • vs90_piaredist
  • vcredist_x86_2005
  • vcredist_x86_2008
  • vcredist_x86_2010
  • vcredist_x86_2012
  • vcredist_x86_2013
  • vcredist_x86_2015 
For computer x64:
  •  vs90_piaredist
  • vcredist_x64_2005
  • vcredist_x64_2008
  • vcredist_x64_2010
  • vcredist_x64_2012
  • vcredist_x64_2013
  • vcredist_x64_2015
If the system is x64, vcredist must install and x86 and x64, otherwise Rheingold will be not start
  • Install Ediabas 7.3
  • Unblock archive !!!. It is important to not skip this step! Unblock ALL files, uncheck Attributes - Read-only. Then unzip.
  • Unzip to any directory, for example: C:\Rheingold, D:\Rheingold, E:\Rheingold..., C:\Program Files\, C:\Program Files (x86) - this folder for 64bit computers. You can run from USB stick too.
  • Unzip and copy SQLiteDBs in Rheingold\SQLiteDBs
  • Add additional languages if necessary in SQLiteDBs
  • Start RCleaner. Run as administrator.
  • Apply ISTA-D Reg Fix bit for your system from the Tools folder.
  • Start Rheingold (...\Rheingold\TesterGUI\bin\Release\ISTAGUI.exe) Run as administrator.
  • Enter the license key from the license.txt, if ask.
  • Enter 1 in the field of ISIS, ignore the error.
  • Voltage control password beemerboy88
    To unblock all files in folder Rheingold by 1 click, open Windows PowerShell like Admin (Run As Administrator).
    • By default Win 7 has 3d version of PowerShell, but we need install 4th version, downloading it from: >>>Microsoft<<<
      for Win 7 x64 file Windows6.1-KB2819745-x64-MultiPkg.msu, and for Win x32 file Windows6.1-KB2819745-x86-MultiPkg.msu

      In PowerShell you should execute command

      gci ’С:\Program Files\Rheingold’ -Recurse | Unblock-File and press Enter (After executing of this command Rheingold starts working on 100%. Test plans, service functions etc)
      And do not close PowerShell after you pressed "enter". It can take about 5 minutes to finish. Nothing will appear on screen, but processes is in work.

     

    BMW_ISTAP_3.60.XXX

    ISTA LOADER V4.8 

    • Keyboard Hotkeys added for KL15 control when using emulator (useful when running ISTAP full screen).Added desktop to list of supported ISTA-P install locations Example: C:\Users\Desktop\ISTA-P 
    == Preparation ==

    • Disable Windows Firewall

    http://windows.microsoft.com/en-us/windo...=windows-7
    http://www.sevenforums.com/tutorials/522...n-off.html

    • Disable a publisher signature verification in Windows 7 "The Publisher Could Not Be Verified"

    http://www.atksolutions.com/articles/win...ified.html

    • You can leave Windows Firewall and Publisher signature verification turned on, but you should always press "Run", "Allow" or "Yes".
    • Disable Interactive services detection (Optional)

    http://computerstepbystep.com/interactiv...rvice.html
    http://blogs.msdn.com/b/patricka/archive...ction.aspx
    • Disable User Account Control (UAC) - (Optional)

    http://www.howtogeek.com/howto/windows-v...ows-vista/

    Instructions

    • Disable your anti virus & firewall & run the network configuration tool "NetworkTool.exe" note: may take a few seconds for tool to appear & up to 30 seconds to complete. 
    • Then check in network connections that the USB network connection has appeared.



     Install .net framework 2 & 4 (do not skip this step - loader will crash if these are not installed).
    • Install Java runtime (do not skip this step - loader will crash if this is not installed).
    • Install patched Ediabas 7.3.
    • Set up your Ethernet adaptor as shown in screenshot below (applies to ENET only. If you only intend using K+DCAN then you can skip this step).

    [Image: V3ENET_1.jpg~original]

    • Copy loader to desktop.
    • Start the loader and choose your required settings and enter some dealerdata. note: ensure ISTA/P is installed on your system. If no ISTA/P installation is found, the loader will not start up.

    How to use with ICOM

    • Disable firewall & turn off WIFI.
    • Connect ICOM to car and PC
    • Click BMW, Mini, or Rolls Royce brand. ISTA/P will now launch.
    • Select your ICOM in connection manager.

    How to use with K+DCAN USB cable

    • First install your k+dcan cable and set up com port etc. (default port number for patched ediabas is com9).
    • Disable your anti virus, firewall & turn off WIFI.
    • Plug in K+DCAN cable and connect cable to car.
    • Start the loader
    • Click the "start K+DCAN ICOM emulator button" once. Then wait for emulator running notifications to appear.

    [Image: loader_emulator5b.jpg~original]

    • Select K+DCAN in connection manager.
    • Click BMW, Mini, or Rolls Royce brand. ISTA/P will now launch.
    [Image: loader_emulator7b.jpg~original]

    Note: when ISTA/P asks for ignition ON/OFF during programming use the KL15 controls located in the notification area of the taskbar (right click on ISTA/P notification icon). Default setting is "ON". Obviously actual car ignition will need to be turned ON/OFF also.

    [Image: loader_emulator4b.jpg~original]

    How to use with ENET cable (F-series)

    • Ensure your Ethernet adaptor is set up as shown in the screenshot below.

    [Image: V3ENET_1.jpg~original]
    • Disable anti virus, firewall & turn off WIFI.
    • Connect ENET cable to car and PC. Turn on ignition and wait for a minute or two.
    • Start the loader.
    • Click the "start ENET ICOM emulator button" once. ZGW search will now open.
    • Enter your cars ZGW IP and click "continue". Then wait for emulator running notifications to appear.

    [Image: Loader_v3_pic2b.jpg~original]

    [Image: Loader_v3_pic3b.jpg~original]
    • Click BMW, Mini, or Rolls Royce brand. ISTA/P will now launch.
    • Select ENET in connection manager.

    [Image: Loader_v3_pic4c.jpg~original]

    Note: when ISTA/P asks for ignition ON/OFF during programming use the KL15 controls located in the notification area of the taskbar (right click on ISTA/P notification icon). Default setting is "ON". Obviously actual car ignition will need to be turned ON/OFF also.

    [Image: loader_emulator4b.jpg~original]

    How to shut down ISTA/P

    Ensure session has ended and cleared from the session overview list. Then close down the ISTA/P window. The loader will then shutdown everything safely. Alternatively use the shutdown button on the ISTA/P notification icon.

    Install:
    ISTA-P Loader requires .NET Framework 2 & 4 both installed on your system.

    Windows XP

    Framework 2 - install using dotnetfx.exe
    Framework 4 - install 4.0 using dotNetFx40_Full_x86_x64.exe (higher versions are not supported by XP)

    Windows 7

    Framework 2 - Built into the OS
    Framework 4 - Install 4.52
    Windows 8

    Framework 2 - Built into the OS BUT needs enabling:
    http://windowsitpro.com/windows-8/q-how-do-i-install-net-framework-35-30-and-20-windows-8

    Framework 4 - Update to 4.52
    https://www.microsoft.com/en-gb/download/details.aspx?id=42642
    Windows 10

    Framework 2 - Built into the OS BUT needs enabling:
    BMW_ISTAP_3.60 
    Download Complete Files from Attached Torrent Link !
    1. Install Ediabas Patched, Java, vcredist 2010, vcredist 2013, vs90_piaredist, net framework 4.5.2 or higher and ALL necessary  tools. 
    2. Install Networktool.exe, for K-DCAN cable. For ICOM don't needed.
    3. Uninstall all older versions, clear registry with CCleaner
    4. Install BMW_ISPI_ISTA-P_SYS_3.60.0.600.exe
    5. Install BMW_ISPI_ISTA-P_SYS_3.60.1.003.exe
    6. Install BMW_ISPI_ISTA-P_SYS_3.60.2.001.exe
    7. Restart PC
    8. Run 3.60.2.001_X86_X64.reg
    9. Run BMW ISTA-P Loader V4.9.exe from Tools folder.
    10. Choose language, resolution and expert mode options. Ignore message about resolution.

    UPDATE
    • To install correctly, be sure don't change any of the original installation file already exists (to put Expert Mode for example). If you have modified any file, will not be installed and will fail. All files in the current install version must be the original.This is imperative to upgrade to the new version.
    • Make sure your system meet the minimal requirement system
    • Make sure to:
    • Turn off Windows Firewall Service
    • Run program as an Administrator
    • Those two thing will eliminate many errors 
    BMW E-SYS

      Setting up the key to E-Sys:

      • Launch E-Sys by double clicking its shortcut on desktop. It might take a minute to start, have patience.
      • Select Options > Settings > EST
      • Click on the browse button with three dots ( …... ) and navigate to EST folder. If automatic installation was done, it should be at C:\ESysData\EST
      • Select file "******.est" and click OK.


      ENET cable testing with Car:

      • Connect ENET cable between car's OBD port and network port of laptop.
      • Switch on the ignition of the car, don't start the engine.
      • You will notice laptop tries to connect to the car. Wait a few minutes until the network icon on laptop shows a Connection with the yellow exclamation point over it.
      • Launch "C:\EDIABAS\Hardware\ENET\ZGW_SEARCH.exe" to verify cable and connection are working. IP Address, MAC Address, & VIN will be displayed in a separate window. That shows that communication between car and laptop can be established with the used ENET cable. It may be useful to create a desktop shortcut for starting ZWG_SEARCH every time. It may not work under Windows 7, try running under Windows XP compatibility mode by right clicking on its exe file and selecting the correct mode.


      First time full backup of Car's configuration files:

      • It's a good practice to take a full back up of Car's setting before any changes are made to the car. This would help reverting back to original settings in case a mistake is made or it is desired to go back to original settings of any or all features.
      • Connect ENET cable between car's OBD port and network port of laptop.
      • Switch on the ignition of the car, don't start the engine.
      • You will notice laptop tries to connect to the car. Wait a few minutes until the network icon on laptop shows a Connection with the yellow exclamation point over it.
      • Press connect button on top row of E-Sys to connect car with the laptop.
      • It opens up a popup, select the correct TargetSelector, e.g . F025 and not F025_DIRECT, select "connection via VIN" and press Connect.
      • Click Ok when connection established.
      • Select "Expert Mode" on the left pane and click on "Coding" button.
      • In Vehicle Order Box (upper left), click on "Read" button., it would display FA of your car.
      • Go to SVT Actual Box (right pane, midway down) and click on "Read(VCM)" button.
      • SVT box will display SVT of different modules of your car, some with green bullets. These green CAFD files are of our interest.
      • Right click on each green CAFD and click on "Read Coding data". Afre codes are read, green icon will change into a folder icon.
      • Read all the green CAFD files one by on or,select multiple by holding the Ctrl key of keyboard and read Coding data by right clicking..
      • Check the folder "C:\ESysData\CAF", this will contain all the read CAFD files.
      • Copy and Save all the files in a safe place. These are your original CAFD files.
      • You can use utility "Copy_CAF_v2.bat" , copy it anywhere on your laptop and double click on it to automatically save the files under a Folder "C:\My_CAF_Files " with date and time stamp.


      Coding CAFD files:

      • Follow 1 to 9 steps of above topic.
      • Expand the folder of any read CAFD of a module that you would like to edit with the changes as shown on the cheat file.
      • Right click on the CAFD file and click "Edit FDL". Enter the pin if asked.
      • Open the module you wanted to edit, click on the Functionen folder, ausgelessen folder of the selected function will show the current settings.
      • Change them as per Cheat Sheet and Save.
      • To be on the safer side, edit only one module at a time.
      • After making all changes in the module as per the cheet sheet for that function, save and go back by pressing top extreme left green arrow "back" button.
      • Now you can see FA again. Right click on it and "Activate FA". You will see a green active text next to FA. Also FP will open on the right side.
      • Select the edited CAFD file on SVT box and Click on "Code FDL" in coding box on right.
      • Coding process will start and should end with no errors.
      • Take a backup of all the CAFD files again and save in a different folder. Best way is to use "Copy_CAF_v2.bat". Copy it any where on your laptop and just double click on it, all will be done for you and files will be saved under a new date time stamped folder.
      • Great, you coded one module. Disconnect E-Sys by clicking on top Connect button which is showing a red x. You are done.
      • Test the car for the changed feature. Some features require 15 -30 minutes to get activated where as some are instant and few need you to switch off the and lock the car and unlock and start.

         

      ICOM, ICOM A1 and Common ICOM A2 Firmware Update

        Steps and Note:

        • Use Network cable to connect ICOM (ICOM A1 or Common version ICOM A2) with a computer, charge ICOM (ICOM A1 or Common version ICOM A2) with 12V power adapter or connect ICOM with the BMW vehicle.
        • Open IE Internet Exploer, browse http://169.254.92.38:60080/, log in with username/password: root/NZY11502.
        • Click "Update Firmware", you will see ICOM firmware version information.
        • Choose file "ICOM-BootImage-xx-xx-xx.bin", set image type to SYSTEM, click "Send the file".
        • When it pops up "Write the image file to the flash?", click "Yes", then ICOM indicator light will turn red.
        • When it pops up "The SYSTEM IMAGE update was successfull", click "Update Firmware".
        • Choose "ICOM-ApplicationImage-xx-xx-xx.bin", set image type to APPLICATION, click "Send the file", it will take several minutes since the file is a little bit large.
        • When it pops up "Write the image file to the flash?", click "Yes", then the ICOM indicator light will turn red for the second times.
        • When it finish upgrading, click "reboot" to reboot the computer.

        Important Note:

        • Setting up your computer to obtain an IP address automatically
        • Firstly choose the smaller file "ICOM-BootImage-xx-xx-xx.bin" , then set image type to SYSTEM; Secondly choose the bigger file "ICOM-ApplicationImage-xx-xx-xx.bin", then set image type to APPLICATION.
        • You can update the ICOM firmware via the ISTA-D Connection Manager.
      • IP: 169.254.33.45:60080 
      • PW: NZY1150263 for  Icom A2
      • Carly for BMW VM

        For it to work you need to have a working VirtualBox installation, K+Dcan cable and a modern day computer 

        • Download the BMW Carly - DISK.vdi (disk image)
        • In VirtualBox - create a new VM with the following parameters:
        • Name: You name it , Type: Microsoft Windows, Version: Windows 8.1 (32-bit)
        • Click Next and choose Memory size: 1024MB
        • Click Next choose "Use an existing virtual hard drive file" - here you point to the BMW Carly- DISK.vdi, that you've downloaded.
        • Click Create and right mouse click on the newly created virtual machine - Settings
        BMW Diagnostic Software Inpa Download
        • Go to System and change the following - Pointing device needs to be "PS/2 Mouse", "Hardware clock in UTC Time" needs to be checked
        BMW Diagnostic Software Inpa Download
        • Next step - plug the K+Dcan cable, start the virtual machine and transfer it to it - from the menu - Devices>USB choose your cable (usually something that has 600 in the name, but probably you'll know which one is it...)
        • In the virtual machine it will ask you - whether you want to start Carly for BMW - do as you want 
        • For this VM to work you need to make sure your laptop supports VT-x/AMD-V and it is enabled. If your laptop is relatively new - it might be disabled in the BIOS (something Virtualization related) - enabled it and you will get over the bootloop.

          SP-DATEN UPDATE 

          BMW Coding Tool 2.50
          Automatic SP-Daten Update Tool for WinKFP and NCSExpert

          BMW Diagnostic Software Inpa Download

           

          2

          DESCRIPTION:

          • Updating of new SP-daten files can be a pain. A lot of copy, paste and adjusting files. Manually and/or with Total Commander.
          • This tool will automatically update your Daten files for you. Only replacing the files that require replacing and skipping the files that don’t. Very easy!!
          • MSCOMCTL Error Fix:
          • For those who get a MSCOMCTL.OCX error… please download the MSCOMCTL Error Fix.zip and follow the instructions
          • First we need to set our default folders for NCSExpert, WinKFP, and EDIABAS. Follow the bellow screen shots!!

          3

          4

          5

          6

          7

          • Once all the folders are set we can now proceed to updating our SPDatens. Doing this by selecting the “Select SP-source” button and then select the folder with the new SPDaten. I always like to start with the earliest model which is E36.
          • Path should look something like mine in the screenshot.

          8

          • Now that we have set our SPDaten path we can now select the “Update SP-daten” button.

          9

          • Only all NEWER files will be copied from:

          …\SP-DATEN-Exx\ECU –> …\EDIABAS\ECU
          …\SP-DATEN-Exx\SGDAT –> …\EC-APPS\NFS\SGDAT
          …\SP-DATEN-Exx\SGDAT –> …\NCSEXPER\SGDAT
          …\SP-DATEN-Exx\DATEN –> …\NCSEXPER\DATEN\Exx
          also update of files in …\NCSEXPER\DATEN

          • You will notice the files that have been replaced will display update –> **.** and the ones that did not require updating will displayremain –> **.**
          • In my case as displayed in the image below all will show remain because I have already updated them.

          11

          • Now repeat the same steps for WinKFP…
          • Select the “Update WinKFP” button and all folders will be copied and replaced from:…\SP-DATEN-Exx\DATA –> …\EC-APPS\NFS\DATA
          • also update of SGIDC.AS2 in …\EC-APPS\NFS\DATA\GDATEN to adjust the “long lines”
          • backup’s of all folders are saved as …\name_date_time

          12

          • Once completed… repeat the same steps for all base models so from E36 to E89. Congratulations you now have successfully updated your NCSExpert and WinKFP with your latest SP-Daten files!! ENJOY!!
          Sale

          Unavailable

          Sold Out

          TAGGED:BMW Diagnose Software Ediabas Download, bmw.inpa download, bmw diagnose software,dis v44 deutsch download ,ediabas download,rheingold 2017 bmw, update inpa ediabas ,bmw ista-d install, bmw diagnose software download,bmw rheingold, bmw e-sys, inpa ncs expert, ista-p, ista-d, etk, disv44, disv57,ncs expert e90,e60,e39,e46, INPA NCS Expert ETK GT1 TIS DIS V57 V44 Fehlerspeicher Lesen Löschen Rheingold ISTA-P ISTA-D E-SYS Autodata, 5ER FEHLERSPEICHER, AIRBAG BEIFAHRER OCCASION, AUSLESEN KOSTEN, BMW 3ER E46 AIRBAGLEUCHTE, BMW 3ER REIHE FEHLERSPEICHER AUSLESEN, BMW ABKÜRZUNGEN, BMW AIRBAG, BMW AIRBAG BEIFAHRER, BMW AIRBAG FEHLER, BMW AIRBAG FEHLER LÖSCHEN, BMW AIRBAG KAUFEN, BMW AIRBAG LEUCHTE, BMW AIRBAG SITZBELEGUNGSMATTE, BMW AIRBAGLEUCHTE E39, BMW CODIEREN,BMW CODIERUNG, BMW CODIERWERTE, BMW CODIEREN, BMW E32 FEHLERSPEICHER AUSLESEN, BMW E36 AIRBAGLEUCHTE,BMW E36 FEHLERSPEICHER AUSLESEN, BMW E38 FEHLERSPEICHER AUSLESEN, BMW E39 AUTOELEKTRIK, BMW E46 AIRBAGLEUCHTE, BMW E46 AUTOELEKTRIK, BMW E46 FEHLERSPEICHER AUSLESEN, BMW E85 FEHLERSPEICHER AUSLESEN, BMW FEHLERSPEICHER AUSLESEN, BMW FEHLERSPEICHER AUSLESEN SOFTWARE, EDIABAS, BMW FEHLERSPEICHER INPA, BMW FEHLERSPEICHER LÖSCHEN, NCS, BMW FEHLERSPEICHER NCS EXPERT, BMW FEHLERSPEICHER RESETTEN, SELBER AUSLESEN, BMW SELBST FEHLERSPEICHER, BMW STEUERGERÄT CODIEREN, BMW STEUERGERÄTE ABKÜRZUNGEN, BMW Z4 CODIEREN, BMW Z4 FEHLERSPEICHER, BMW Z4 FEHLERSPEICHER AUSLESEN, BMW Z4 FEHLERSPEICHER LÖSCHEN, CODIERANLEITUNG, E39 AIRBAGLEUCHTE,FEHLERSPEICHER AUSLESEN BMW, FEHLERSPEICHER BMW E39, FEHLERSPEICHER BMW E46, FEHLERSPEICHER LÖSCHEN, INPA, INPA CODIERUNG, NCD KODIERUNG, NCS, NCS ANLEITUNG, NCS CODIERANLEITUNG, NCS CODIEREN, NCS CODIERUNG, NCS CODIERWERTE, NCS EXPERT, NCS EXPERT ANLEITUNG, NCS EXPERT PASSWORT, NCS EXPERTENTOOL, NCS KODIEREN, NCS PROFIL, STEUERGERÄT ABKÜRZUNGEN

          Sale

          Unavailable

          Sold Out